9.00 -17.00 
Ubiquiti Gate Access Starter Kit (UA-SK-Gate)
648,51 €
527,24 €
Auf Lager
SKU
UBIQUITI-UA-SK-GATE
Gate Access Starter Kit - UniFi Zutrittskontrolle für das Tor
Gate Access Starter Kit (UA-SK-Gate)
Steuern Sie ein Fahrzeugtor mithilfe der angeschlossenen Gegensprechanlage und autorisieren Sie den Torzugang mit der Nummernschild-Entriegelung, wenn Sie es mit einer kompatiblen koppeln
Kitinhalt:
- Gate Hub
- Gegensprechanlage
- PoE++-Adapter
- 2-Draht-PoE-Extender – 2 Stück
Technische Daten:
| UA-Hub-Gate Mechanisch |
|
|---|---|
| Abmessungen | 175 x 126 x 26 mm (6.9 x 5 x 1") |
| Gewicht | 460 g (1 lb) |
| Material des Gehäuses | Polycarbonate |
| Montage | Din-rail (Included) |
| Hardware | |
| Schnittstelle zur Vernetzung | (5) 10/100/1000 Base-T |
| Macht-Methode | PoE++ |
| Max. Leistungsaufnahme | Without PoE output: 22W With PoE output: 50W |
| PoE-Eingang | 50V DC, 1A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, Max. 28W |
| Schaltfläche | (1) Factory-reset |
| Digitaler Eingang | Gate exit request, gate position, side door exit request, side door position, emergency |
| Trockenes Ausgangsrelais | (2) Operator: rated 30V DC, up to 1A (1) Aux: rated 30V DC, up to 1A |
| Leistungsfähiges Ausgangsrelais | Side door lock: 12V DC, up to 1A |
| Betriebsumgebung | Indoor use only with device itself Outdoor use with waterproof junction box |
| Betriebstemperatur in der Umgebung | -30 to 60° C (-22 to 104° F) |
| Luftfeuchtigkeit in der Betriebsumgebung | 5 to 90% noncondensing |
| Zertifizierungen | CE, FCC, IC |
| LEDs | |
| PoE in | Steady white: Pending adoption Steady blue: Adopted, device is ready Blinking white/blue: Upgrading firmware |
| PoE out | Off: Not connected or no data link Steady white: Connected and data link on |
| Eingangsklemmen | Off: No wire Steady white: Wire connected Blinking white: Active signal |
| Ausgangsrelais | Off: No wire Steady white: Wire connected Blinking white: Relay triggered |
| UA-Intercom Mechanisch |
|
| Abmessungen | 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1") |
| Gewicht | Device: 965 g (2.1 lb) Bracket: 445 g (1 lb) |
| Material des Gehäuses | Aluminum alloy, UV-stabilized polycarbonate, glass |
| Montagematerial | Powder-coated stainless steel |
| Montage | Wall mount, adapter to the gooseneck pedestal (Included) Surface angle mount, flush mount (Optional) Sunshield kit (Optional) |
| Wetterschutz | IP65 |
| Hardware | |
| Schnittstelle zur Vernetzung | (1) GbE RJ45 port |
| Konnektivität | Bluetooth 4.2 NFC |
| Macht-Methode | PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU |
| Unterstützter Spannungsbereich | 48V DC |
| Max. Leistungsaufnahme | 13W |
| ESD-/EMP-Schutz | Air: ±15kV, contact: ±8kV |
| Sensoren | Proximity sensor ALS sensor |
| Kamera | 3264 x 2448, 8 MP H: 79.4°, V: 97.5°, D: 118.2° |
| Anzeige | 177 mm (7") diagonal |
| Auflösung | 1024 x 600 (16:9) |
| Anzeige der Leuchtdichte | Max. 1000 nits (typical) |
| Touchscreen-Technologie | Capacitive multi-touch |
| Mikrofon | Yes |
| Sprecher | (1) 4 ohm, 2W |
| LEDs | (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally) (1) LED floodlight (13) Keypad LED backlight |
| Schaltfläche | (1) Factory-reset |
| NFC-Frequenz | 13.56 MHz |
| NFC-Lesereichweite | < 30 mm |
| NFC-Normen | ISO 14443A, 14443B, 15693 |
| NFC-Technologie | NFC Tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire |
| Betriebstemperatur in der Umgebung | Device: -30 to 60° C (-22 to 140° F) Display:* -25 to 60° C (-13 to 140° F) *The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66) |
| Betriebsumgebung | Outdoor use |
| Luftfeuchtigkeit in der Betriebsumgebung | 5 to 90% noncondensing |
| Software-Informationen | The software version of a product can be checked at https://unifi.ui.com |
| Stufe UL 294 | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I |
| UL 294 Erklärung | Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| Anforderungen an die PoE-Verkabelung | Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| CAN/ULC-60839-11-1 Klasse | Grade assignment: I |
| Zertifizierungen | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Dokumentnummer und Ausgabedatum und/oder Revisionsstand | UA-Intercom, V01 |
| UACC-Extender-2Wire-PoE-Tx/Rx Mechanisch |
|
| Abmessungen | 40 x 105 x 25 mm (1.6 x 4.1 x 1") |
| Gewicht | PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz) |
| Material des Gehäuses | Polycarbonate |
| Befestigungsmaterial | Polycarbonate |
| Hardware | |
| Schnittstelle zur Vernetzung | (1) 10/100 MbE (1) Homeplug AV |
| Macht-Methode | PoE++ |
| Max. Leistungsaufnahme | 3W (Without PoE output) |
| PoE-Eingang | (1) PoE++, 50V DC, Max. 1.2A |
| PoE output | (1) PoE+, 48V DC, 0.72A |
| ESD-/EMP-Schutz | Air: ±8kV, contact: ±4kV |
| LED | White |
| Betriebstemperatur in der Umgebung | -10 to 40° C (14 to 104° F) |
| Luftfeuchtigkeit in der Betriebsumgebung | 5 to 95% noncondensing |
| Zertifizierungen | CE, FCC, IC |
| U-PoE++ Specifications |
|
| Modell | U-PoE++ |
| Abmessungen | 106 x 63 x 34 mm (4.2 x 2.5 x 1.3") |
| Gewicht | 210 g (7.4 oz) |
| Ausgangsspannung | 48V DC @ 1.25A |
| LAN-Aktivitätsanzeige | No |
| Gigabit LAN port | Yes |
| Remote reset capability | No |
| Reset button | No |
| Rated voltage | 100—240V AC @ 50/60Hz |
| Eingangsstrom | 1.3A @ 120V AC 0.75A @ 230V AC |
| Inrush current | <100A peak @ 120V AC <200A peak @ 230V AC |
| Wirkungsgrad | 85+% |
| Ausgangswelligkeit | 1% max. |
| Switching frequency | 65 kHz |
| Leitungsregelung | ≤ 1% |
| Load regulation | ≤ 3% |
| 2-pair powering | No |
| 4-pair powering | Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-) |
| AC connector | IEC-320 C6 |
| Data In / PoE | RJ45 shielded socket |
| Surge protection | Difference and common mode |
| Clamping protection | 11V data, 60V power |
| Max. surge discharge | 1500A (8/20 μs) power |
| Peak pulse current | 36A (10/1000 μs) data |
| Shunt capacitance | <5 pF data |
| Response time | <1 ns |
| Macht-Methode | Universal AC input, 100—240V AC, 50/60 Hz |
| Stromversorgung | AC/DC |
| Unterstützter Spannungsbereich | 100—240V AC |
| Max. PoE+ wattage per port by PSE | 60W |
| Betriebstemperatur in der Umgebung | 0 to 40° C (32 to 104° F) |
| Storage temperature | -30 to 70°C (-22 to 158° F) |
| Luftfeuchtigkeit in der Betriebsumgebung | 10 to 95% noncondensing |
| Zertifizierungen | CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS |
| Hersteller-SKU | UA-SK-Gate |
|---|---|
| Hersteller | Ubiquiti |
| Stück in Sammelverpackung | 3 |
| GPSR kontakt |
Ubiquiti International Holding B.V. Ekkersrijt 3102, 5692 CC Son en Breugel support@ui.com |
Kunden, die diesen Artikel gekauft haben, kauften auch
Ubiquiti UniFi Video Camera G5 (UVC-G5-BULLET)
137,21 €
111,55 €
Ubiquiti Standard 24 PoE (USW-24-POE)
396,07 €
322,01 €
Mikrotik Wireless Wire nRAY (nRAYG-60adpair)
236,59 €
192,35 €
Ubiquiti UniFi UAP In-wall HD (UAP-IW-HD)
153,14 €
124,50 €
Ubiquiti U6 In-Wall (U6-IW)
192,37 €
156,40 €
Please complete your information below to login.
Anmelden
Neuen Account erstellen