Ubiquiti PowerBeam 5AC-400 ISO (PBE-5AC-400-ISO)
| Hersteller-SKU | PBE-5AC-400-ISO |
|---|---|
| EAN | 810354023620 |
| Hersteller | Ubiquiti |
| Stück in Sammelverpackung | 5 |
PBE-5AC-400-ISO
 |
The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Providing high performance and innovative mechanical design at a low cost, the PowerBeam ac ISO is extremely versatile and cost-effective to deploy.
| PBE-5AC-400-ISO System and Regulatory/Compliance | |
| Processor Specs | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 16 MB Flash |
| Networking Interface | 10/100/1000 Ethernet Port |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| PBE-5AC-400-ISO Physical/Electrical/Environmental | |
| Dimensions | 459 x 459 x 261 mm (18.07 x 18.07 x 10.28") |
| Weight | 3.22 kg (7.10 lb) |
| Power Supply | 24V, 0.5A PoE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20-26VDC |
| Max. Power Consumption | 8.5W |
| Gain | 25 dBi |
| Operating Frequency: Worldwide USA |
5170 - 5875 MHz 5725 - 5850 MHz |
| Wind Loading | 390 N @ 200 km/h (88 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| LEDs | Power, (1) LAN, (4) WLAN |
| Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
| Channel Sizes PtP mode PtMP mode |
10/20/30/40/50/60/80 MHz 10/20/30/40 MHz |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Mounting | Pole-Mount Kit Included |
| ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Operating Humidity | 5 to 95% Non-Condensing |
| Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
| Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
| Hersteller-SKU | PBE-5AC-400-ISO |
|---|---|
| EAN | 810354023620 |
| Hersteller | Ubiquiti |
| Stück in Sammelverpackung | 5 |
