9.00 -17.00 
Ubiquiti Wave AP Gen2 (Wave-AP-Gen2)
| Manufacturer SKU | Wave-AP-Gen2 |
|---|---|
| Manufacturer | Ubiquiti |
| PCS in collective packaging | 4 |
Ubiquiti Wave-AP-Gen2 - 60 GHz PtMP access point with Wave technology
Accessories and add-ons:
Ubiquiti Wave AP Gen2 – 60 GHz Point-to-Multipoint (PtMP) Base Station with Antenna Output
The Ubiquiti Wave AP Gen2 (Wave-AP-Gen2) is a high-performance point-to-multipoint (PtMP) base station operating in the 60 GHz band (supported range: 57–71 GHz). The device is equipped with an integrated 90° sector antenna, which allows for servicing up to 31 clients (CPE). Thanks to 16QAM modulation, the device offers a combined throughput of 5.4 Gbps (2.7 Gbps symmetrical), enabling the construction of high-speed access networks with a range of up to 6 km (0.9 km for Wave Pico and 6 km for Wave Pro / Long-Range).
One of the new features of this version is a modified 5 GHz backup radio module, operating in the WiFi 6 (802.11ax) standard. Unlike the basic models, the Wave AP Gen2 features physical antenna connectors that allow for the connection of external antennas for the 5 GHz band. This allows for maintaining a stable backup link at distances where integrated antennas would be insufficient if the 60 GHz signal quality deteriorates.
The device is designed to fully utilize available radio bandwidth. Network interfaces include one 2.5 GbE RJ45 port and a 10 Gbps SFP+ slot. Smooth packet processing is ensured by a quad-core ARM Cortex-A53 processor clocked at 1.4 GHz, supported by 512 MB of RAM.
The device is equipped with a Passive PoE power supply. The station accepts a wide range of input voltages: standard 48V (44–54 V DC) and voltages typical of legacy 24V (22–27 V DC) installations. The entire unit is housed in an aluminum alloy and UV-resistant polycarbonate enclosure that meets the IPX6 water and dust resistance standard. Management is performed via the UISP platform, which uses a built-in GPS receiver and Wave AI algorithms to optimize connections.
Key Features
- Primary Radio: 60 GHz (57–71 GHz), 5.4 Gbps Throughput, 16QAM Modulation
- Secondary Radio: 5 GHz WiFi 6 (802.11ax) with External Antenna Outputs
- Antenna Pattern: 90° Sector, 20 dBi
- Interfaces: 1× 2.5 GbE RJ45, 1× 10G SFP+
- Power Supply: Passive PoE 48V or 24V (48V 0.65A power supply included)
- Range: Up to 6 km (with Wave Pro/Long-Range), up to 4 km (with Wave Nano)
- Durability: IPX6, wind resistance up to 200 km/h
- Requirements: UISP version 2.4.205 or later
Technical Specifications
System and Performance |
|
|---|---|
| Total Throughput | 5.4 Gbps |
| Supported Clients | 31 |
| Maximum Range | Connection with Wave Pro: up to 6 km Connection with Wave Long-Range: up to 6 km Connection with Wave Nano: up to 4 km Connection with Wave Pico: up to 0.9 km |
| Encryption | WPA2-PSK (AES) |
Radio Frequency (Main 60 GHz) |
|
| Operating Frequency (Worldwide) | 57–71 GHz |
| Channel Width | 2160, 1080, 540 MHz |
| Operating Channels | 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200, 70560 MHz |
| Modulation | 16QAM, QPSK |
| Antenna Gain | 20 dBi |
| Polarization | Vertically-Linear |
| Beamwidth | Azimuth: 3 dB 90° Elevation: 3 dB 7° |
| Electrical Tilt (Downtilt) | 0° |
Radio Frequency (Backup - 5 GHz) |
|
| WiFi Standard | 802.11ax (WiFi 6) |
| Operating Frequency (US/CA) | U-NII-1: 5150 - 5250 MHz U-NII-2A: 5250 - 5350 MHz U-NII-2C: 5470 - 5725 MHz U-NII-3: 5725 - 5850 MHz |
| Operating Frequency (Worldwide) | 5150 - 5875 MHz |
| Channel Width | 20, 40, 80 MHz |
| Modulation | BPSK (1/2), QPSK (1/2), QPSK (3/4), 16QAM (1/2), 16QAM (3/4), 64QAM (2/3), 64QAM (3/4), 64QAM (5/6), 256QAM (3/4), 256QAM (5/6), 1024QAM (3/4), 1024QAM (5/6) |
| Antenna Gain | 13 dBi |
| Polarization | Dual-Linear |
| Beamwidth | Azimuth: 6 dB 95° Elevation: 6 dB 25° |
| Cross-Pol Isolation | 18 dB |
| Electrical Downtilt | 0° |
Software and Features |
|
| Operation Modes | PtMP Access Point |
| Ubiquiti Services and Specific Features | Discovery Protocol, UISP, Ping Watchdog, NTP Client, SNMP |
| Tools | Cable Test, Wave AI, Wave Technology |
| System Tools (Utilities) | Antenna Alignment, Ping, Site Survey, Speed Test, Traceroute |
| Network Mode | Bridge Mode |
| UISP Version Required | UISP Version 2.4.205 or later |
Hardware and Interfaces |
|
| Processor | Quad-core ARM® Cortex®-A53 1.4 GHz |
| Memory | 512 MB |
| Network Interface | (1) 2.5 GbE RJ45 Port (1) 10G SFP+ Port |
| GPS | Yes (✓) |
| Buttons | (1) Factory Reset |
| LEDs | Power: Blinking white: Booting up White: Not connected to UISP Blue: Connected to UISP Blinking blue: Locating Blue/white: Firmware update Ethernet: Blinking white: Ethernet traffic detected Blinking blue: Traffic detected SFP+ GPS: Blue: Receiving signal from at least (4) GPS satellites |
Power |
|
| Maximum Power Consumption | 24W |
| Power Method | Passive PoE 4-pair (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pair (4, 5+; 7, 8-), for 44-54V DC only |
| Supported Range Voltage | 44–54V DC 22–27V DC |
| Power Supply | PoE Adapter 48V DC, 0.65A 2.5 GbE (Included) |
Other |
|
| NDAA Compliant | Yes (✓) |
| Certifications | FCC, IC, CE |
| Dimensions | 158.3 x 286.8 x 100.2 mm (6.2 x 11.3 x 3.9") |
| Weight | 1.5 kg (3.3 lb) |
| Housing Material | UV-Stabilized Polycarbonate, Aluminum Alloy |
| Pole Mount Diameter | 25.4 to 60 mm (1 to 2.4") |
| Wind Resistance | 109.8 N at 200 km/h (25 lbf at 125 mph) |
| Class Sealing | IPX6 |
| Operating Temperature | -40 to 60° C (-40 to 140° F) |
| Operating Humidity | 5 to 95% non-condensing |
| Manufacturer SKU | Wave-AP-Gen2 |
|---|---|
| Manufacturer | Ubiquiti |
| PCS in collective packaging | 4 |
| GPSR contact |
Ubiquiti International Holding B.V. Ekkersrijt 3102, 5692 CC Son en Breugel support@ui.com |
Please complete your information below to login.
Sign In
Create New Account