9.00 -17.00 
Ubiquiti Glass Break Sensor - Wireless 2-in-1 sensor - motion, glass break (USL-GlassBreak)
| Manufacturer SKU | USL-GlassBreak |
|---|---|
| Manufacturer | Ubiquiti |
The Ubiquiti Glassbreak Sensor is a 2-in-1 wireless sensor that combines PIR motion detection with acoustic glassbreak detection. SuperLink technology provides 2 km of seamless integration with UniFi Protect, forms part of an alarm system, and operates for 3 years on a single set of batteries.
Ubiquiti Glass Break Sensor – Glassbreak and Motion Detector
Ubiquiti Glass Break Sensor (USL-Glassbreak) is a battery-powered alarm sensor that integrates acoustic glassbreak detection with a passive infrared (PIR) sensor for motion detection. The device communicates with the network via the proprietary SuperLink protocol, operating in the sub-GHz band (865.1–869.5 MHz for the EU region). Using this frequency allows for a stable transmission range of up to 2 km in line of sight. This makes the sensor an optimal solution for large commercial facilities, warehouses, or office buildings where standard Wi-Fi infrastructure does not provide an adequate signal.
The integrated microphone has been calibrated to analyze the acoustic frequencies associated with the breakage of various types of glass. The system recognizes, among other things, Destruction of standard, tempered, laminated, reinforced, and coated glass panels (with thicknesses ranging from 2.4 mm to 6.4 mm and a maximum size of 1067 x 1626 mm). The device is also equipped with a mechanical tamper switch, which immediately reports any unauthorized removal attempts to the controller. The device natively integrates with the UniFi Protect platform, allowing administrators to fully correlate alarm events with the video surveillance system.
Thanks to optimized power consumption (maximum 0.2W), the device can operate continuously for up to 3 years using two standard CR123A (3V) lithium batteries. The polycarbonate housing allows for non-invasive wall or corner mounting (using dedicated adapters with adhesive tape or screws). The sensor is designed to operate indoors, in temperatures ranging from 0°C to 40°C.
Key features:
-
Connectivity: SuperLink protocol (sub-GHz) with a range of up to 2 km.
-
Sensors: Integrated microphone (glassbreak detection) and PIR sensor (detection movement).
-
Security: Tamper switch.
-
Power supply: 2x CR123A lithium battery (3V); Up to 3 years of operation (max. consumption 0.2W).
-
Management: UniFi Protect app.
Technical Specifications
| Microphone | Yes |
| UniFi App Suite | Protect |
| Connectivity | SuperLink |
| Operating Frequency | US: 915.6–927.6 MHz EU: 865.1–869.5 MHz |
| Antenna Gain (SuperLink) | 1 dBi |
| Max. TX Power (SuperLink) | 14 dBm |
| Maximum Range (SuperLink) | 2 km |
Sensor Features |
|
| PIR Sensor | Yes |
| Detected Glass Types | Plate, Tempered, Frosted/Screened, Laminated, Coated, Reinforced |
| Size Glass | from 280 x 356 mm (11 x 14") to 1067 x 1626 mm (42 x 64") |
| Glass Thickness | 2.4 mm (3/32"), 4.8 mm (3/16"), 3.2 mm (1/8"), 6.4 mm (1/4") |
Device |
|
| Buttons | (1) Function Button (1) Factory Reset (1) Switch Tamper Protection |
| LED Indicators | (1) Status: R/B/W (Red/Blue/White) (1) Signal: B/R (Blue/Red) |
| NDAA Compliance | Yes |
| Certifications | FCC, IC, CE |
Power Supply |
|
| Maximum Power Consumption Power | 0.2 W |
| Supported Voltage Range | 3 V |
| Power Method | (2) CR123A Lithium Batteries |
| Battery Life | Up to 3 years |
Other |
|
| App Requirements | Web App: UniFi Protect Mobile App: UniFi Protect iOS™ and Android™ |
| Dimensions | Device with wall mount: 134.5 x 22.5 x 24.8 mm (5.3 x 0.9 x 1") Device with corner mount: 134.5 x 22.5 x 27.9 mm (5.3 x 0.9 x 1.1") |
| Weight | With mount and batteries: 70 g (2.5 oz) |
| Mounting | Adhesive and screws |
| Material Housing | Polycarbonate |
| Handle Material | Polycarbonate |
| Operating Temperature | 0 to 40° C (32 to 104° F) |
| Operating Humidity | 10 to 90% (non-condensing) |
Ubiquiti Glass Break Sensor - Frequently Asked Questions (FAQ)
The sensor detects the breakage of flat, tempered, frosted, laminated, coated, and wired glass.
Supported size range: from 280 × 356 mm to 1067 × 1626 mm
Supported thicknesses: 2.4, 3.2, 4.8, 6.4 mm (3/32, 1/8, 3/16, 1/4").
The Glass Break Sensor should be mounted vertically, approximately 2 m above the floor and 2-7.6 m away from the glass.
- Installation Recommendations:
- Ensure the mounting surface is clean and free from dust and dirt.
- Avoid mounting near noise or vibration sources such as fans, air conditioners, speakers, and doorbells.
- Make sure curtains, furniture, or other objects do not block the microphone opening.
Yes. The Glass Break Sensor also includes a PIR motion sensor.
Yes. The glass break sensor uses two replaceable CR123A batteries.
Breaking glass to test the sensor is not recommended.
To confirm the device's functionality, it is better to use publicly available online tests. recordings of the sound of breaking glass.
| Manufacturer SKU | USL-GlassBreak |
|---|---|
| Manufacturer | Ubiquiti |
| GPSR contact | Ubiquiti International Holding B.V. Ekkersrijt 3102, 5692 CC Son en Breugel support@ui.com |
Please complete your information below to login.
Sign In
Create New Account