Ubiquiti In-Wall Speaker - In-wall speaker 6,5", 130 W (UACC-In-Wall-Speaker)

Ubiquiti In-Wall Speaker - Wall speaker 6,5" 130 W

Ubiquiti In-Wall Speaker (UACC-In-Wall-Speaker) is a passive installation speaker designed for flush mounting in a wall. Its two-way design uses a 6,5-inch woofer and a 1-inch tweeter that can pivot by ±15°, allowing high frequencies to be directed as required after installation. The speaker handles up to 130 W and can be used with an external amplifier.

The frequency response is 47 Hz to 20 kHz with a tolerance of ±3 dB, the nominal impedance is 8 Ω, and sensitivity is 86 dB SPL at 1 W from a distance of 1 m. The maximum sound pressure level reaches 106 dB SPL at 1 m, while nominal sound coverage is 90° and axisymmetric.

The speaker is installed inside a prepared opening and secured by clamps pressing against the back of the wall. The magnetically attached metal grille can be painted, making it easier to match the wall colour and reduce the visibility of the installation.

A standard speaker cable sized from 8 to 16 AWG is used for connection. The enclosure is made of polycarbonate with a metal grille. The speaker measures 315 × 229 × 88 mm, has an installation depth of 88 mm and weighs 1,9 kg. The operating temperature range is -5 to 40°C.

Note: This is a passive speaker and requires an external amplifier. Ubiquiti PowerAmp can support up to three pairs, or six In-Wall Speakers in total, using the recommended wiring configuration.

Key features

• Two-way design: Uses a 6,5-inch woofer and a 1-inch tweeter with ±15° directional adjustment.
• Power and impedance: Handles up to 130 W at a nominal impedance of 8 Ω.
• Frequency response: Covers the range from 47 Hz to 20 kHz with a tolerance of ±3 dB.
• Sound level: Sensitivity is 86 dB SPL (1 W/1 m), and the maximum level reaches 106 dB SPL at 1 m.

Technical specifications

Ubiquiti In-Wall Speaker – Frequently Asked Questions (FAQ)